Friday, April 14, 2017

Feeney DesignRail® Mounting Options - The Fascia Bracket Mounted Post

The Fascia Fascia Bracket Mounted Post is a popular method of attaching the DesignRail®
post to the Deck. This is a great option for a narrow deck, so the Railing doesn't take up any deck space. This is also a great option if you have decking that overhangs the deck. The Fascia Bracket Offsets the post by an 1-1/4, so you don't have to notch the decking, unless it overhangs more than 1-1/4". The Posts are 2-3/8" aluminum extrusions and there are three cross sectional profiles.  The Standard Post is used on Residential Projects and the Commercial Post is used on Commercial Projects. The Heavy Duty Post is used on all projects for the terminating and corner posts, when using Horizontal Cable Infill. The Posts will come pre-cut and pre-drilled for 36", 38" and 42" Railings. Maximum post spacing for a residential project is 6'-0" on center and 5'-0" on center for commercial projects. Fascia Brackets are 6" wide and come in 5" & 7" heights. Fascia Brackets for corners are available for single and double corner posts at 90 degree angles. Be sure to check the blocking requirements with your Cable Rail Direct Detailer. The finishing height will be slightly higher and will depend on the Top Rail selected. Stair Posts are usually sent blank and drilled in the field, but they are available pre-drilled in the following three standard angle ranges, 23 -28 degrees, 29 - 34 degrees and 35-39 degrees. Be sure to let your Cable Rail Direct Detailer know your stair angle before requesting the pre-drilled stair post.

No comments:

Post a Comment